Gas Lift Valves | Endurance Lift Solutions

Quality and precision are the keys to confidently deploying a gas lift system. Our team has placed over 50,000 gas lift valves into service, so we have encountered every configuration, downhole environment and system limitation imaginable.

We bring our valve manufacturing experience to bear in all aspects of preparing and deploying your gas lift system. Our valve testing protocols meet or exceed API recommended practices in every area. We stress test every component of each valve in our state-of-the-art digital testing benches, so you know your Endurance gas lift system is ready to kick off and return value from day one.

Tubing Retrievable Gas Lift Valves

IPO10 Injection Pressure-Operated Gas Lift Valve

The IPO10 Gas Lift Valve is a 1" OD conventional gas lift valve designed for use in either continuous flow or intermittent flow gas lift installations.

The valve is bellows-operated, nitrogen-charged and normally closed. The simplicity of the IPO10 design assures a long operating life.

CV10 Conventional Reverse Flow Check Valves

The CV10 Conventional Reverse Flow Check Valves are 1" velocity check valves used with Conventional Gas Lift Valves that do not have integral reverse flow check valves.

These check valves protect the casing from back flow through valves below the working valve, allow application of pressure to the tubing for circulation or acidizing and prevent commingling of production fluids in dual gas lift installations.

IPO15 Injection Pressure-Operated Gas Lift Valve

The IPO15 Gas Lift Valve is a 1-1/2" OD conventional gas lift valve designed for use in either continuous flow or intermittent flow gas lift installations.

The valve is bellows-operated, nitrogen-charged and normally closed. The simplicity of the IPO15 design assures a long operating life.

CV15 Conventional Reverse Flow Check Valves

The CV15 Conventional Reverse Flow Check Valves are 1-1/2" velocity check valves used with Conventional Gas Lift Valves.

Wireline Retrievable Gas Lift Valves

GBK Injection Pressure Operated Gas Lift Valve

The GBK Gas Lift Valve is a 1” OD slickline retrievable, injection pressure operated valve designed for use in either continuous flow or intermittent gas lift installations.

The valve is run on a GBK Series latch in a KB Series style pocket mandrel.

GBKO-3 Gas Lift Orifice Valve

The GBKO-3 Orifice Valve is a 1" OD slickline retrievable valve designed for use in continuous flow gas lift installations.

When installed in a KB series mandrel, the GBKO-3 is used to control the flow gas from the casing annulus to the tubing. When installed in a KB series style mandrel with the EC feature for annular lift, the GBKO-3 valve controls flow from the tubing to the casing. The valve consists of two primary housing components, a floating set, a check dart, a valve nose, and two sets of external packing.

E Dummy Valve

The E Dummy Valve is a 1" OD slickline retrievable non-equalizing dummy valve designed to be installed in a KB series style side pocket mandrel.

The dummy consists of two packing sections installed on two pieces of bar stock. The dummy valve is threaded to accept a GBK series top latch. The valve is available in either high-nickel alloys or stainless steel for corrosion resistance in wells with high concentrations of H2S and/or CO2.

Screened Orifice Valve

The screened orifice valve is typically installed as the deepest point of injection in a gas lift system, and is installed in conjunction with a reverse flow check valve.

The screened orifice has a tungsten carbide seat that is available in multiple port sizes depending on the desired injection rate.

GBK-2 Latch

The GBK-2 Latch is a 1" OD, spring loaded, and ring style latch that anchors retrievable gas lift valves and side pocket accessories in the appropriate KB series style mandrels.

Gas Lift Valves Lasting Quality for Longer Run Life

Gas Lift Valves
Lasting Quality for Longer Run Life